Sliding Gate Operator (SL600/SL800/SL1000)
- Power supply voltage must meet the requirements, do not use over voltage or under-voltage
- When installing or repairing the gate, please cut off the input power first;
- Please make sure that the door opener is grounded reliably, the grounding resistance is less than 4 Q, and there is leakage and short circuit protection.
- At the proper position of the side of the door opening machine on the track, a limit iron should be firmly welded, which should be outside the range of the electric appliance limit, so that it is appropriate to block the two sides of the walking wheel and the door body does not leave the guide wheel constraint. To prevent the electrical limit failure gate from both sides of the guide wheel constraints caused by overturning;
- Before the door is opened, obstacles should be cleared; vehicles and pedestrians are strictly prohibited from passing through the gate while it is in operation
- Avoid children playing operation remote control and control box switch
- The motor shall not be disassembled on its own, and the maintenance shall be carried out by professional personnel.
- This machine uses high—grade lubricating grease, no need to replace or add lubricating oil.
A. Motor
B. Limit magnet or Limit stopper
C. Rack
D. Photocell (Optional)
E. Alarm lamp (Optional)
Motor Specification (600KG/800KG/1000KG)
Model : SL-600, SL-800, SL-1000
Power Supply : 220V/50Hz AC
Suitable door weight : 600KG, 800KG, 1000KG
Motor Power : 370W
Move Speed : 10m/min
Motor Noise : Less 500b
Environment Temp. : -30°C~+60°C
Motor net weight : 10.4KG
Install the limit magnet or spring limit at proper position on the steel rack. Move the gate manually to the open limit and close limit , mark the points on the rack, then, fix the limit stoppers or magnets at the limit points on the rack.
SL 1500/ SL 2000
Model : SL 1500/SL 2000
Power Supply : 220V/50Hz
Suit. door weight : 1500kg-2000kg
Motor Power : 550W
Motor Speed : 1400r/min
Gate Speed : 12m/min
Motor Noise : 56Db
Environ. Temp. : -45°C~+65°C
SL 3500
Model : SL 3500
Power Supply : 380V/50Hz
Suit. door weight : 3500kg
Motor Power : 1100W
Motor Speed : 1400r/min
Gate Speed : 11m/min
Motor Noise : 58Db
Environ. Temp. : -45°C~+65°C
SL 4000/ SL 6000
Model : SL 4000/ SL 6000
Power Supply : 380V/50Hz
Suit. door weight : 4000kg-6000kg
Motor Power : 1500W/2200W
Motor Speed : 1400r/min
Gate Speed : 12m/min
Motor Noise : 58Db
Environ. Temp. : -45°C~+65°C